Airtec AG
Industriestrasse 40
CH-4455 Zunzgen/BL
Phone+41 (0)61 976 9525
Fax +41 (0)61 976 9526
info@airtec.ch
Needle Scaler |
|||||
|
|
|||||
|
|
|||||
|
|
|||||
| Link to film (under development) | Needle Scaler brochure (pdf) | ||||
|
|
|||||
| Product | Needle Scaler | ||||
|
|
|||||
| Field of application | Use on any surface for: Derusting Descaling Chipping off paint Removing paint Trimming weld seams Roughening concrete |
The AIRTEC air operated hammer gently and easily removes concrete and cement residues in only a short time. |
|||
|
|
|||||
| Versions | AT-1 (air operated) AT-2-S (air operated) AT-0 (air operated) AT-2 (air operated) |
AT-3 (air operated) AT-4 (air operated) AT-1-K (air operated) AT-2-K (air operated) |
AT-2-SK (air operated) AT-3-K (air operated) AT-4-K (air operated) |
||
|
|
|||||
| Design | Air operated Needle Scaler with steel nails Standard version (S) with adjustable head piece Short model (K) with fixed, non-adjustable head piece Short model straight (SK) with fixed, non-adjustable head piece |
||||
|
|
|||||
| Basic version | Air operated Needle Scaler complete with steel nails | ||||
|
|
|||||
| Technical data | Blow count | Air requirement | Weight | ||
 |
AT-1 | 5050 | 116 l/min | 1.5 kg | |
 |
AT-1-K | 5050 | 116 l/min | 1.5 kg | |
 |
AT-2-S | 4850 | 135 l/min | 2.6 kg | |
 |
AT-2-SK | 4850 | 135 l/min | 2.6 kg | |
 |
AT-0 | 5900 | 95 l/min | 2.2 kg | |
 |
AT-2 | 4850 | 135 l/min | 2.6 kg | |
 |
AT-2K | 4850 | 135 l/min | 2.6 kg | |
 |
AT-3 | 3830 | 163 l/min | 3.6 kg | |
 |
AT-3K | 3830 | 163 l/min | 3.6 kg | |
 |
AT-4 | 2980 | 234 l/min | 5.8 kg | |
 |
AT-4K | 2980 | 234 l/min | 5.8 kg | |
|
|
|||||
| Accessories |
Steel nails (generate sparks)2 mm fits all AIRTEC Needle Scalers |
||||
Beryllium nails (low-spark working possible)3 mm fits all AIRTEC Needle Scalers |
|||||
|
|
|||||
| Manufacture | Swiss development and production, certified to quality and environmental guidelines | ||||
 |
|||||
|
|
|||||
| Safety | According to CE standards | ||||
RSS 2.0